The Impact of the Surface Treatments on the Properties of GaN/3C-SiC/Si Based Schottky Barrier Diodes
View/ Open
File version
Accepted Manuscript (AM)
Author(s)
Han, Jisheng
Tanner, Philip
Dimitrijiev, Sima
Shuang, Qu
Shen, Yan
Xu, Xiangang
Year published
2013
Metadata
Show full item recordAbstract
In this work, we studied the effect of surface preparation and substrate temperature during sputter deposition of Schottky contacts on N-GaN/SiC/Si substrates, looking at parameters such as on-resistance, reverse leakage, and contact barrier height. Ti, Ni and Mo were sputtered to form the contacts, and we characterized the I-V curves with the different substrate temperatures during the sputtering as shown in Figure 1. For the Ti Schottky contact, the substrate temperature of 100oC during the sputtering demonstrates the minimum series resistance with Rs about 0.04?cm2, while temperatures greater than 3000C increased reverse ...
View more >In this work, we studied the effect of surface preparation and substrate temperature during sputter deposition of Schottky contacts on N-GaN/SiC/Si substrates, looking at parameters such as on-resistance, reverse leakage, and contact barrier height. Ti, Ni and Mo were sputtered to form the contacts, and we characterized the I-V curves with the different substrate temperatures during the sputtering as shown in Figure 1. For the Ti Schottky contact, the substrate temperature of 100oC during the sputtering demonstrates the minimum series resistance with Rs about 0.04?cm2, while temperatures greater than 3000C increased reverse bias leakage. The Mott-Schottky plot reveals a barrier height of 1.2V for this contact. Results for sputtered Ni contacts using different substrate temperatures will also be presented, as well as the effect of Ar sputter cleaning before contact deposition.
View less >
View more >In this work, we studied the effect of surface preparation and substrate temperature during sputter deposition of Schottky contacts on N-GaN/SiC/Si substrates, looking at parameters such as on-resistance, reverse leakage, and contact barrier height. Ti, Ni and Mo were sputtered to form the contacts, and we characterized the I-V curves with the different substrate temperatures during the sputtering as shown in Figure 1. For the Ti Schottky contact, the substrate temperature of 100oC during the sputtering demonstrates the minimum series resistance with Rs about 0.04?cm2, while temperatures greater than 3000C increased reverse bias leakage. The Mott-Schottky plot reveals a barrier height of 1.2V for this contact. Results for sputtered Ni contacts using different substrate temperatures will also be presented, as well as the effect of Ar sputter cleaning before contact deposition.
View less >
Journal Title
Materials Science Forum
Volume
740-742
Copyright Statement
© 2013 Trans Tech Publications. This is the author-manuscript version of this paper. Reproduced in accordance with the copyright policy of the publisher. Please refer to the journal's website for access to the definitive, published version.
Subject
Physical chemistry
Microelectronics
Materials engineering